Vantec 7-Port USB 2.0 & FireWire 400 PCI Combo Host Card Instrukcja Użytkownika Pobierz pdf (Strona 4)

Hardware Installation



UGT-UF100Page4

1. Turn Off the power to your computer.

2. Unplug the power cord and remove your computer’s cover.

3. Remove the slot bracket from an available PCI slot

4. To install the card, carefully align the card’s bus connector

with the selected PCI slot on the motherboard. Push the

board down firmly.

5. Connect the system power source to the board’s power

connector.

6. Replace the slot bracket’s holding screw to secure the card.

1 2 3 4 5 6 7

Brak uwag

Vantec 7-Port USB 2.0 & FireWire 400 PCI Combo Host Card Instrukcja Użytkownika Strona 4